Smallest Four Gas Confined Space Monitor
Simultaneous detection of 4 gases, LEL, O2, H2S & CO
Smallest / Lightest 4 gas monitor on the market
Dual audible alarm ports
3 visual alarm LED’s
IP-67 water-resistant/dustproof design
Calibration and bump test lock out or reminder controls
20 hours of operation (NiMH batteries)
Automatic backlighting at alarm
Impact resistant over-mold body, RFI shielded body
STEL and TWA readouts
Intrinsically safe, CSA, C/US classified, IECEx / ATEX approved, SOLAS XI-1/7 Compliant, MSHA approved version available
No charging ever!
No calibration needed!
Detects H2S, CO, O2 & combustible gases (LEL)
Save time never having to charge or service your portable multi-gas detector! Reliably test for H2S, CO, O2 & combustible gases (LEL) with this simple-to-use & simple-to-maintain detector. Just turn it on & have worry free assurance of protection against toxic gases 24/7 for two full years. Features: Durable - Ergonomic - Simple One Button Operation - Works in oxygen enriched and oxygen deficient environments - LEL sensor is immune to H2S & silicone poison - Assembled in USA - Compatible with MGC Simple Dock or MGC Simple Wall Mount Dock.
Battery life for months instead of hours!
Day in, day out, your workers have to charge their portable multi gas detectors so they can keep testing for the presence of combustible gases, H2S, CO, and O2. Unfortunately, sometimes they may forget to do so. Gas Clip Technologies can help prevent this safety risk with our new Multi Gas Clip (MGC). It has the longest battery life of any portable gas detector by a long shot.
The new MGC can go a full 2 months without a charge, even without ever having to be turned off. Shut down the unit nightly and the battery can last up to 4 months. What’s the secret of the MGC’s extended battery life? It uses low-power photo-metric technology for the detection of the combustible gases (LEL). Instead of draining the battery with archaic pellistor technology, the MGC uses an IR source. This conserves power, so the battery lasts and lasts and lasts.
The MGC also eliminates the need to frequently calibrate portable gas detectors. It can go 12 months without being calibrated. That saves time and increases efficiency. Each Multi Gas Clip, IR version, comes with the following features:
The Gas Clip Technologies MGC Dock is an all-in-one stand-alone docking station designed for maximum testing efficiency and portability. It tests up to four units simultaneously, reducing the testing time and gas usage. With only two buttons, it’s simple to train workers how to use it for regular bump tests, occasional calibrations, or to deactivate detectors. It can be optionally housed in a rugged Pelican© case or a wall-mountable metal enclosure. Logs are stored on a USB flash drive which can easily be transferred to a computer for analysis.
Each Dock comes with the following standard features:
Twice a day, every day… that’s how often you have to charge most portable gas detectors, until now. Introducing the Multi Gas Clip Pump (MGC Pump) from Gas Clip Technologies, the only portable multi gas detector with an internal sampling pump that can go an entire work week without a charge.
The MGC Pump follows in the long line of portable gas detectors by Gas Clip Technologies that last and last and last. Being able to go a long time between charges is a family tradition.
Like our MGC, the MGC Pump uses low-power photometric technology to detect combustible gases (LEL) rather than age- old pellistor technology. The MGC Pump uses an IR source which conserves power and helps the battery last and last.
The MGC Pump is also designed for comfort. The reduced, sloping shape of the holding area at the bottom of the instrument makes the MGC Pump a comfortable fit in the hands of your workers. It is fully submersible and simple to operate. The MGC Pump offers a one button design and the largest LCD screen in the industry so it’s easy to read.
Other multi gas detectors require calibration anywhere from 1 to 3 months. The MGC Pump can go 6 months without being calibrated.This is an added benefit of IR sensing technology because IR is immune to pellistor sensor poisons such as silicone or H2S.
The Gas Clip Technologies MGC Pump Dock is an all-in-one stand-alone docking station designed for maximum testing efficiency and portability. It tests up to four units simultaneously, reducing the testing time and gas usage. With only two buttons, it’s simple to train workers how to use it for regular bump tests, occasional calibrations, or to deactivate detectors. It can be optionally housed in a rugged case or a wall-mountable metal enclosure. Logs are stored on a USB flash drive which can easily be transferred to a computer for analysis.
Each Dock comes with the following standard features:
Gas Clip Technologies Single Gas Clip Plus or SGC Plus, is the only maintenance free handheld gas detector available with “Hibernate” mode. “Hibernate” mode allows users to place this disposable single gas detector in a rested state when not in use. The SGC Plus is perfect for seasonal/turnaround contractors or rental fleets. When your job or turnaround is finished, simply synchronize the instrument with our IR Link or SGC Dock and put the detector in a rested state. When you are ready to use the detector again, simply press the power button to reactivate the detector.
With the SGC Plus, you only pay for the time that the handheld gas detector is in use. Each SGC Plus will last for 24 months of use and comes with a warranty of 24 months of use or 3 years from activation (whichever comes first). However, this mode can only be enabled via IR communication with either the IR Link or SGC Dock accessories (not by a button push), so only authorized personnel can place the units in “hibernate” mode. The SGC Plus also provides the most advanced maintenance free disposable single gas detector on the market. Unlike other disposable single gas detectors, the SGC Plus combines a rugged design and reliability with advanced sensor resolution (0.1 ppm for H2S models). Advanced micro processing capabilities allow for quick unit configuration adjustments to comply with current and future industrial health and safety gas exposure regulations for workers in industrial environments. Each SGC Plus comes with the following features:
Be sure to compare these features to our Multi Gas Clip and Single Gas Clip to find the right product for your current application.
Whether it’s the hottest environment or the coldest, our Single Gas Clip is designed and tested to provide worker safety in the harshest working conditions. At Gas Clip Technologies, we enhance customer safety by using the latest technology. We test 100% of our portable gas detectors, not just a random sample of units. That’s why we can offer a low cost of ownership on our gas detectors. There are no hidden service charges, no maintenance fees– just reliable units that will help your facility workers and contractors do their jobs safely, productively and cost effectively.
For unmatched safety, reliability and productivity, choose the world’s most advanced single gas detector, the Single Gas Clip.
Be sure to compare these features to our Multi Gas Clip and Single Gas Clip Plus to find the right product for your current application.
Gas Clip Technologies SGC Dock is an all in one docking station designed for maximum testing efficiency and portability. Housed in a rugged Pelican© case with robust USB memory, this station will be able to accurately test and record all monitor data while reducing the testing time and gas usage.
Traditional docking stations are only designed to test one instrument at a time, resulting in time consuming testing periods as well as unnecessary usage of testing gas. Gas Clip Technologies has significantly improved both testing time and test gas usage with the SGC Dock; users can now test 4 instruments simultaneously saving both time and money. Each SGC Dock comes with the following standard features:
Everything you need for remote sampling. Includes: Hard-sided carrying case with foam insert, 3ft. calibration hose with quick connect, hand aspirator pump, 10ft. sampling hose with quick connect, 1ft. sampling probe, IR Data Link, and a 0.5 lpm regulator. (MGC detector and gas sold separately)
Connected to your computer by USB, the GCT IR Link communicates directly with the Multi Gas Clip and MGC Dock to program special alarm set points, user options, as well as, download event logs & data logs.
For your workers on the go, we have the option of charging using the vehicle charger (12V only).
|Description||Part Number||List Price (USD)|
|MGC Calibration Cap (Spare)||MGC-CALCAP||$10.00|
|Alligator Clip (MGC or MGC-P)||MGC-AL-CLIP||$10.00|
|Filter: Pack of 10 (MGC or MGC-P)||MGC-FILTER-10||$15.00|
|Filter: Pack of 50 (MGC or MGC-P)||MGC-FILTER-50||$50.00|
|MGC LCD w/plastic housing, reflector plate and zebra stripes||MGC-LCD||$30.00|
|LEL Replacement Sensor (Pellistor)||MGC-SE-LEL-P||$100.00|
|LEL Replacement Sensor (Infrared)||MGC-SE-LEL-IR||$295.00|
|O2 Replacement Sensor||MGC-SE-O2||$100.00|
|H2S & CO Dual-Tox Replacement Sensor||MGC-SE-4DT||$225.00|
|MGC Battery Assembly||MGC-BAT1||$75.00|
|Replacement Charger - 110 VAC (MGC or MGC-P)||MGC-CHARGER1||$15.00|
|Vehicle Charger - 12 VDC (MGC or MGC-P)||MGC-V-CHARGER1||$30.00|
|MGC Dock Charger - Standard 110v Power Cord||MGC-DOCKCHARGER1||$22.00|
|Remote Sampling Probe||MGC-PROBE-1||$58.00|
|Replacement Filters and Gaskets (MGC-PROBE-1)||MGC-PROBE-RF||$45.00|
|In-line Water Trap Filter||MGC-WT||$20.00|
|Air Stone Particulate Filter (Kit of 3)||MGC-PF||$7.00|
|Quad Gas Cylinder: 25 ppm H2S, 100 ppm CO, 18% O2 and||MGC-Q-58||$210.00|
|50% LEL (2.5% vol Methane)|
|Manual Regulator (For Non-Dock Use)||SGC-REG||$145.00|
|Calibration Hose 3ft||MGC-CALHOSE3||$2.50|
|Hand Aspirator Kit w/Sample Hose, Cal Cap, Probe & Stone Filter||MGC-HAK||$95.00|
|MultiGas 5 Bay Charging Station for Non Pump Model||MGC-CHRG-STATION||$545.00|
|MultiGas 5 Unit Cable Charger||MGC-CHRG-MULTI||$119.00|